Showing 1–16 of 40 results
-
Balboa Genesis Blower – 500W Universal Spa Blower – Non Heated – Electronic – On/Off Only
£224.99Balboa / HydroAir Genesis Air Blower – G50-2NN-S – 500W – Electronic (On/Off Only) – Non Heated
The Balboa / HydroAir Genesis range of blowers are easily identified by their distinctive blue casing.
They are used by many hot tub manufacturers but will more commonly be found as the blower of choice in many whirlpool baths out there.
The Genesis range all feature rotatable outlets making installation easy and a threaded 1.5″BSP x 32mm union is included.
A host of options and features are available throughout the range. See the specifications below.
Note:
Replacement only for a Single Cable Genesis Blowers.
A carefully positioned non-heated blower will draw warm air from pumps and heating equipment.
-
Balboa Hydro Jet – 85mm – Directional – Standard Thread – White
£33.95Balboa Hydro Jet 85 mm – Directional – Standard Thread – White
NOTE: For use with the Hydro Jet body. Must be used with 2″ Suction nut gasket to seal correctly. Please select length based on wall thickness
-
Balboa Magna / MagnaFlow Jet – 2″ – Directional – White
£33.95Balboa Magna / MagnaFlow Jet Front – 2″ – White/Smooth – Directional Eyeball
Ideal as a replacement, an upgrade or as part of a new install.
NOTE: Will only fit the Magna jet body 50 x 32mm (for spas). Used in Sundance Spas
-
Balboa MICRO Jet – 69mm – Thread IN White/Smooth
£29.99Balboa / HydroAir – Micro Jet Front – White/Smooth – Thread IN
Ideal as a replacement, an upgrade or as part of a new install.
Gasket Included
Face Diameter : 69mm
Total Length: 40mm
Maximum shell thickness: 18 mm
Outside Thread Diameter: 41mm
-
-
-
-
Balboa Ultrazone Ozone Generator – Natural Disinfection System
£85.99Balboa Ultrazone Ozone Generator Kit – MPN 59088Natural Spa Disinfection- Balboa’s NEW small and compact Ultrazo3ne
- Water disinfection System – killing viruses and biological contaminants.
- Low power consumption
- Reduction the usage of chemicals
- MPN: 59088
NOTE: This unit has no replaceable internal chip, instead it has a Corona Discharge mechanism. Replaces 54451 and the old chip version ref 54449 that are no longer manufactured by Balboa
Dimensions
Length: 78mm
Width: 68mm
Height: 34mmKit Includes :
- 1 x Ultrazo3ne
- 1 x Check Valve
- 1 x 5ft. flexible hose
- 1 x Air Filter
- 1 x Installation Manual
Note: Custom ozone outputs, input power connectors are available upon request
Note: Balboa’s NEW small and compact Ultrazo3ne replaces 55441 in the more competitive package.
This product directly replaces part number 20-5130.Kit Includes :
- 1 x Ultrazone
- 1 x Check Valve
- 1 x 5ft. flexible hose
- 1 x Air Filter
- 1 x Installation Manual
NOTE: This unit has no replaceable internal chip, instead it has a Corona Discharge mechanism.
-
CMP Prime Massage Jet – 5” – Graphite/Stainless Pro-Loc
£39.49Features the PRO-LOC System
PATENTED LOCKING SYSTEM
The innovative Pro-Loc mechanism ensures positive engagement between insert and body
for optimal performance. The CMP Pro-Loc design also allows for easy installation and
removal of jet inserts.
HIGH PERFORMANCE POLYPROPYLENE DIFFUSER
The polypropylene diffuser design is highly chemical resistant.
The Pro-Loc attachment design also improves insert strength and durability.
VITON O-RING SEAL
All Pro-Loc jets feature a Viton o-ring that improves vacuum and air draw by as much as 46% when compared to standard style bodies.
The o-ring seal also enhances the rotational feel of the jet insert.
-
Floating Chemical Dispenser
£12.99This floating dispenser will make it easy to keep your pool or spa correctly sanitised. Simply place a few tablets into the dispenser, twist the bottom to open the circulation holes and allow it to float in the water. When you wish to bathe simply remove the dispenser and place in a safe place. Then put it back into the water once you have got out. Very simple to maintain, just check the dispenser every 4-7 days and replenish the tablets as necessary.
-
Gecko Aeware Heat.Wav in.yj – 2.0kW
£218.00Heater Specifications
Dimensions
- 497 x 125 (mm)
Summary
- MPN: 0613-421010
- Minimum of 18 GPM (68.1 LPM) is required
- WORKS WITH IN.YJ CONTROLS
- 2.0KW
- IN.FLO (DRY-FIRE PROTECTION)
- 2″ X 2″ TAILPIECE
-
Gecko Aqua-flo XP2e Spa Pump – 3HP – 1 Speed 79mm Centre Suction x 79mm Side Discharge
£459.99Greater Flow-rates with Overall Energy Efficiency
Aqua-Flo by Gecko’s XP2e pumps provide greater flow than XP2 sister models allowing spas to use more jets per pump, increasing the features and benefits offered to customers.
The Aqua-Flo by XP2 pump is designed for today’s large spas with multiple jets requiring increased flow. The XP2e pump fits within the same envelope as the original XP2 pump, yet provides greater flow than its predecessor with its superior design and parts. This allows spas to use more jets per pump while still operating at a whisper quiet noise level
The energy consumption of the pump allows for the same and greater flow rates while improving the overall energy efficiency of the spa, reducing consumer operating costs
Ideal for High-flow Requirements
- Booster Jet Pumps
- Single or Dual Speed
- 1 ½HP / 2HP / 2 ½HP / 3HP Power Options
- Flow Rate up to 800LPM
Easily Customisable to Fit Your Needs
- Discharge can be oriented on 4 positions
- Fits all Requirements
- Many Options for the Drain Plug
This hot tub pump will directly replaces the older XP2 version, usually fitted with smooth body motors from Emmerson or AO Smith.
The XP2 range of pumps are also suitable replacements for other bands of pump with 2″ intake and outlet connections, such as Waterway, Sta-rite and Vico.
These pumps are fitted with Aqua-flo manufactured wet ends and high quality EMG motors.
Please Note:
- The XP2e pumps are supplied without a cable. We recommend re-using the cable from your old pump to ensure correct fitment to your spa pack
-
Gecko IN.TEMP Heat Pump – 5kW
£1,862.00Heater Specifications
Dimensions
- 794 x 555 x 395 (mm)
Summary
- Power Input (max): 1.29kW
- Rated Current: 3.9A
- Max. Current: 6.07A
- Pressure: Min. 218psi / Max. 609psi
- Best Flow Rate: 2.27m3/h / 10GPM
- WORKS WITH IN.YE & IN.TOUCH
- 5.0KW
- QUIET & EFFICIENT
-
Gecko Spa Pack Bundle – in.ye-5 / in.k200-2OP – 2 Pump Bundle
£749.99Bundle Specifications
Dimensions:
- Spa Pack: 497 x 273 x 126 (mm)
- Topside: 120 x 51 x 43 (mm)
Ratings:
- Heater Flow Rate: Minimum of 18 GPM (68,1 LPM) is required
- Temperature(max): 58°C
- Max Load: 48A (Single-Phase) / 20A (Dual-Phase) / 16A (3-Phase)
- Heating: 3kW at 230-240V
General Information- Spa Pack Model – in.ye-5
- Spa Pack MPN – 0610-221045-338
-
Topside Model – in.k200-2OP
-
Topsides MPN – 0607-008002
- Heater Power – 3.0kW
System Functionality
- Number of Pumps – 2
- Circ Pump – Yes
- Blower – Yes
- Ozone – No
- Lights – 12V
- Wifi – Enabled
- Audio System – Enabled
Spa Pack Topside Compatibility
- Compatible Topsides – IN.K Series
- Topside Connection – in.Link
- Auxiliary Topside – Compatible
Topside Information- Topside Shape – Rectangle
- Topside Button Qty – 4
- Topside Dimensions – 120 x 51 mm
- Topside Series – IN.K Series
- Complete Topside MPN – 0607-008002
- Topside Connection – in.Link
- Topside Compatibility – Y SERIES
- Topside Display – TypeLCD
-
Gecko Spa Pack Bundle – in.ye-5 / in.k450-3OP – 3 Pump Bundle
£695.99Bundle Contents:
0610-300007 bundle (formerly BDLYE5K450CE)
- Spa pack: in.ye-5 (0610-221045-338)
- Heater: 3.0kW
- Keypad: in.k450-3OP (0607-005012)
- Cables: 2 x dual speed AMP cable (95100519) & 2 x single speed AMP cable (95100517) & Light (9920-400489 – 9920-401507)
- Mounting Equipment: Adaptor plate (9917-102123)
Spa Pack Details:
The in.ye is the perfect solution to bring your spas to the next level.
Universal fit
With their relays and their small footprint, Y series platforms were designed to fit in and to easily be installed, powered and connected to pumps and accessories of spas of all sizes and configurations, from simple entry level hot tubs to complex swim spa systems,Y series control systems meet all requirements.
Immediate boost
Y series boasts impressive features and the most advanced technology in convivial, reliable, safe and long-lasting control systems that benefit all spa users. Designed to deliver optimal performance and to provide total control at the users fingertips, Y series gives spa owners the immediate satisfaction of getting a lot more than what they expected from their spas.
Future expandability
Y series control systems open up on value-added features that increase the quality of users spa experience with plug and play addition of accessories and peripherals such as wireless control for mobile devices, water sanitation, audio streaming, auxiliary keypads and much more.
Topside Control Details:
Compact full-function keypad
In.450 keypads feature a large LCD display and slightly raised keys that let users control all spa system functions and programming directly from spa side. In.k450 comes with a customizable overlay in an easy to install waterproof plastic enclosure designed to maximise users experience.
All spa system functions are at user’s fingertips to create an enjoyable experience.
With its large LCD display, the in.k450 keypad makes user control both simple and efficient.
Designed for a great interactivity, in.k450 has been created with special attention to its shape and 6 slightly raised keys.
- 6 Button: On/Off, Pump 1, Pump 2, Pump 3/Blower, Light & Up / Down
- Dimensions: 181mm x 73mm
- Cable Length: 3m
-
Gecko Spa Pack Bundle – in.yj-3 / in.k300-10P – 1 Pump Bundle
£498.99Bundle Contents:
0612-300003 bundle (formerly BDLYJ3K300CE)
- Spa Pack: in.yj-3 (0612-221031-287)
- Heater: 2.0kW (0615-421002)
- Topside: in.k300-1OP (0607-008039)
- Cables: 2 Speed AMP Plug (9920-401345), 2 Speed QC to QC (95100251), Light (9920-400489- 9920-401507) and White LED Bulb (246AA0064)
- Mounting Equipment.: Adaptor Plate (9917-102239) & L Bracket (9917-102327)
Relaxation in full colours with in.mix integration
With a light output capacity increased to 1A and the integration of the in.mix 300 colour system on the main board, new in.lu.me cables and LED lights can be connected directly to the in.yj-V3 box with full colour control directly from the keypad.
Topside Control Details:
The in.k300 brings all the features you really need to one keypad. Compact, with a big LCD screen; bright enough to be seen in day, simple enough to use in the middle of the night; affordable, yet solidly built.With the in.k300 you don’t pay for what you don’t use, and you don’t compromise on what you do.
- 4 Button: Pump, Light, Up, Down
- Dimensions: 160mm x 57.2mm
- Cable Length: 3m