Showing 17–32 of 40 results
-
HydroAir – Classic Line Control Box 20-0242 – 2 Function On/Off
£115.00Description
HydroAir Classic Line Control Box 20-0242 – Two (2) Function On/Off
Single-phase, 230V, 16A, 50/60Hz, rated power 3680W. The total sum of the loads shall not exceed the rated power
Output connection: 2 Control connections:
1 Used with HydroAir touch pads or LED buttons.
Waterproof: IXP5Water
Level Connection: Yes JST Plug (25-0211-5)
This control box allows for the on/off operation of 2x equipment types, such as water pump, air pump, light and disinfection system.
The HydroAir Classic Line series can be used to replace older HydroAir controllers with one, two or three control connections, such as the 500 Electronic Standard system.
If your system is a fast connection box (prefix 22-xxxx), you will also need to replace the connector.
-
HydroAir Pneumatic Control Box – 1 Function
£59.99HydroAir Pneumatic Control Box – BWG0611
1 X input for control button, 1 X input for device to operate
Allows on/off function via Pneumatic button.
-
HydroAir Touch Pad – 1 Function – 39mm – Blower On/Off
£99.99A 39mm diameter 1- function touch pad used for ‘Blower on/off’ control incorporating an LED that lights up when function is activated.
The touch pad is on a white ABS frame with a grey foil.
The pad comes in white or you can decorate it with a chrome-plated brass escutcheon to add a more sophisticated look.
Hydroair Part No: 23-3747
-
HydroAir Touch Pad – 1 Function – 39mm Pump On/Off
£57.99A 39mm diameter 1- function touch pad used for ‘Pump on/off’ control incorporating an LED that lights up when function is activated.
The touch pad is on a white ABS frame with a grey foil.
The pad comes in white or you can decorate it with a chrome-plated brass escutcheon to add a more sophisticated look.
Hydroair Part No: 23-3737
If you have any queries or questions please do not hesitate to contact us
-
HydroAir Touch Pad – 1 Function – 64mm – Pump On/Off
£99.99A 64mm 1 function touch pad used for pump on/off control incorporating an LED that lights up when the function is activated.
The touch pad is on a white ABS frame with a grey foil.
The pad comes in white or you can decorate it with a chrome plated brass escutcheon to add a more sophisticated look.
Hydroair Part No: 23-3039
If you have any queries or questions please do not hesitate to contact us.
-
HydroAir Touch Pad – 2 Function – 64mm 2 x On/Off
£92.99A 64mm 2 function touch pad used for 2 x on/off control incorporating an LED that lights up when the function is activated.
The touch pad is on a white ABS frame with a grey foil.
The pad comes in white or you can decorate it with a chrome plated brass escutcheon to add a more sophisticated look.
Hydroair Part No: 23-3609
If you have any queries or questions please do not hesitate to contact us.
-
HydroAir Touch Pad – 2 Function – 64mm Pump & Blower
£101.99A 64mm 2 function touch pad used for pump & blower on/off control incorporating an LED that lights up when the function is activated.
The touch pad is on a white ABS frame with a grey foil.
The pad comes in white or you can decorate it with a chrome plated brass escutcheon to add a more sophisticated look.
Hydroair Part No: 23-3119
If you have any queries or questions please do not hesitate to contact us.
-
HydroAir Touch Pad – 3 Function – 64mm 3 x On/Off
£113.99A 64mm 3 function touch pad used for 3 x on/off control incorporating an LED that lights up when the function is activated.
The touch pad is on a white ABS frame with a grey foil.
The pad comes in white or you can decorate it with a chrome plated brass escutcheon to add a more sophisticated look.
Hydroair Part No: 23-3619
If you have any queries or questions please do not hesitate to contact us.
-
HydroAir Touch Pad – 3 Function – 64mm Pump / Light / Blower
£113.99A 64mm 3 function touch pad used for pump, blower & light on/off control incorporating an LED that lights up when the function is activated.
The touch pad is on a white ABS frame with a grey foil.
The pad comes in white or you can decorate it with a chrome plated brass escutcheon to add a more sophisticated look.
Hydroair Part No: 23-3149
If you have any queries or questions please do not hesitate to contact us.
-
HydroAir Touch Pad – 5 Function – 64mm Pump / Blower / Light / Up / Down
£119.99A 64mm 5 function touch pad used for blower on/off, plus/minus, massage mode, pump on/off & light on/off control incorporating an LED that lights up when a function is activated.
The touch pad is on a white ABS frame with a grey foil.
The pad comes in white or you can decorate it with a chrome plated brass escutcheon to add a more sophisticated look.
Hydroair Part No: 23-3669
If you have any queries or questions please do not hesitate to contact us
-
LED Floating Drinks Holder – Bar
£55.00Relax and unwind by adding this attractive Hot Tub drinks holder that floats and lights up with LED`s. Perfect bar/drinks holder for your Hot Tub or Swim Spa! This LED bar /drinks float is moveable and is powered by a rechargeable battery. The inbuilt LED lights provide lighting that illuminates all the glass holders.
- 42 x 16cm Approx
- Rechargable Battery
- Remote Controlled
-
Life CO-Lift DLX Under Mount Lifter – Fits Spas Up To 96″
£238.99Life Co-Lift DLX Under Mount Lifter
It will fit most spas up to 96″. Both square and rectangular. With corner radius up to 10″ for undermount installation
Requires 24″ behind the spa and only 5″ on each side.
Powder coated aluminium tubing
Easy to install.
Includes 4 towel hooks.
Locking pin to safely keep the cover open and closed.
Foam protectors on rail
Holds up to 90kg in weight.
-
Life Lift LX Side Mount Lifter – Fits Spas Up To 240cm
£213.99Life Co-Lift LX Side Mount Lifter
Fit both square and rectangular Spas of up to 240cm
Only requires 10-15″ of clearance behind and 5″ each side.
Powder coated aluminium tubing with foam protectors on corners
Can hold 114kg of weight
-
LX Blower – AP400-V2 – 400W – Non Heated
£85.99LX Blower – AP400-V2 – 400W – Non Heated
The AP series of blowers can be found in many spas manufactured in the far east including Danz Spa, Spa Serve, AMC Winer, Cascade, MAAX, Monalisa & Trinity.
They are non-heated blowers and feature an angled mounting bracket to instal either upright or on their side.
Supplied with a union for 32mm pipe.
-
LX Circ / Whirlpool Pump – JA35 – 0.33HP – 1 ½” Suction
£101.99Built for continuous work
The JA Series has been one of the longest serving pumps built by LX. Designed and built to ensure it remains watertight during long periods of continuous operation.
The JA35 has a low positioned centre suction port enables the pump to self-drain once the motor is shut off.
The Motor itself is low noise and creates little vibration, so will quietly do its job allowing you, or your customers, to enjoy the hydro massage bathtub or spa.
It would most commonly be used as a circulation pump on hot tubs and swim spas. But can also be fitted to many whirlpool baths as well.
LX Whirlpool pumps are now commonplace on hot tubs imported from all around the world. Fitted to brands such as MAAX, Cascade, Trinity, Monalisa and AMC Winer along with many other newer spa brands appearing in the European market.
The JA35 is also ideal for use with
- Cycling water for fishponds, including those that require salt water or actual seawater.
- Weak corrosive liquids such as weak acids (without solid granules)
- For circulating fluids for use in workshops for cooling.
A wide range of models across the range means you can often replace more expensive pump brands with these great alternatives.
Please Note:
LX pumps are no longer fitted with air switches.
Air switches or pneumatic control boxes can be fitted by a qualified electrician to these pumps.
-
LX Circ / Whirlpool Pump – JA50 – ½HP 1 ½” Suction
£101.99Built for continuous work
The JA Series has been one of the longest serving pumps built by LX. Designed and built to ensure it remains watertight during long periods of continuous operation.
The JA50 has a low positioned centre suction port enables the pump to self-drain once the motor is shut off.
The Motor itself is low noise and creates little vibration, so will quietly do its job allowing you, or your customers, to enjoy the hydro massage bathtub or spa.
It would most commonly be used as a circulation pump on hot tubs and swim spas. But can also be fitted to many whirlpool baths as well.
LX Whirlpool pumps are now common place on hot tubs imported from all around the world. Fitted to brands such as MAAX, Cascade, Trinity, Monalisa and AMC Winer along with many other newer spa brands appearing in the European market.
The JA50 is also ideal for use with
- Cycling water for fish ponds, including those that require salt water or actual seawater.
- Weak corrosive liquids such as weak acids (without solid granules)
- For circulating fluids for use in workshops for cooling.
A wide range of models across the range means you can often replace more expensive pump brands with these great alternatives.
Please Note:
LX pumps are no longer fitted with air switches.
Air switches or pneumatic control boxes can be fitted by a qualified electrician to these pumps.